APC 200/208V 30A ZeroU L6-30P 24-Outlet Metered Rack Power Distribution Unit

The APC AP8441 is a 24 outlet metered rack power distribution unit that gives you clear, actionable insight into the energy drawn by every connected device. Built for installations that run on 200 to 240 volt power and carry up to 30 amps, it lets data center managers, network administrators, and lab engineers distribute power safely while keeping an exact eye on usage.

The unit provides 21 IEC C13 and three IEC C19 receptacles, so it can handle anything from standard servers and switches to high demand blade enclosures. A ten foot cord that terminates in a NEMA L6-30P plug reaches existing wall or floor power drops without forcing you to rearrange the rack layout. Because the PDU mounts vertically in the rack’s side channel, it consumes Zero U of valuable rack space and leaves the front and rear rails open for equipment.

Outlet level metering reports real time current draw for each device. That detail helps you balance loads across phases, avoid accidental overloads, and plan future capacity with hard numbers instead of guesswork. If a circuit approaches a threshold you set, the unit can alert you through secure web, SNMP, or Telnet interfaces so you can act before a breaker trips.

A local digital display shows aggregate current at a glance, which is handy during maintenance windows when technicians are at the rack. Locking IEC outlets hold power cords firmly in place, reducing the risk of accidental disconnects when airflow panels or cables are moved.

The AP8441 integrates with popular APC management platforms, making it possible to trend energy data over time, map power paths, and coordinate with environmental sensors. Whether you run a high density data center, a university lab, or a remote network closet, this PDU helps you keep power delivery transparent, efficient, and predictable.

• Twenty one IEC C13 and three IEC C19 outlets support a wide range of equipment
• Metering at the outlet level provides accurate, per device energy tracking
• 30 amp input rating with 200 to 240 volt support suits high density racks
• Ten foot power cord with NEMA L6-30P plug allows flexible positioning
• Vertical mounting uses Zero U of rack space
• Secure web, SNMP, and Telnet access for remote management and alerts
• Local digital display shows real time current draw
• Locking IEC receptacles help prevent accidental disconnects
• Integrates with APC monitoring software for centralized control